StormBrixx® SD
StormBrixx® SD is ACO’s standard duty plastic geocellular surface water management system. It consists of a single, recyclable, polypropylene body that can be assembled in a variety of ways to form an open bonded structure.
 | 3 Half bodies per cubic metre |
 | Functional design combined with an intelligent snap-lock system make for easy handling and rapid installation |
 | High void ratio of 97% of total volume available for storage |
 | Height of 1 layer: 914mm or 490mm for 1/2 layer |
 | Min. cover depth (see image above): 0.5m – landscaped 0.6m – car park |
 | Side panels are used on the outer walls of the structure to enable geotextiles and geomembranes to be installed |
 | Recyclable polypropylene material provides a robust and corrosion-resistant basis for a longlasting stormwater management system |
 | Small openings at the base of the pillars allow water to fill and drain. This allows the pillars to form part of the storage volume |
StormBrixx® SD parts list
StormBrixx® SD tank half body
| Overall Length (mm) | Overall Width (mm) | Overall Depth (mm) | Weight (kg) | Part No. | |
|---|---|---|---|---|---|
 |
1200 | 600 | 494 | 9.5 | 314090 |
StormBrixx® SD (full and half) side panels
| Overall Length (mm) | Overall Width (mm) | Overall Depth (mm) | Weight (kg) | Part No. | ||
|---|---|---|---|---|---|---|
 |
 |
907 | 592 | 104 | 3.1 | 314091 |
 |
453 | 592 | 104 | 1.5 | 314098 |
StormBrixx® SD (full and half) top cover
| Overall Length (mm) | Overall Width (mm) | Overall Depth (mm) | Weight (kg) | Part No. | ||
|---|---|---|---|---|---|---|
 |
 |
550 | 550 | 50 | 0.8 | 314092 |
 |
1200 | 600 | 94 | 3.5 | 314094 | |
StormBrixx® SD layer connectors
| Overall Length (mm) | Overall Width (mm) | Overall Depth (mm) | Weight (kg) | Part No. | |
|---|---|---|---|---|---|
 |
53 | 44 | 26.5 | 0.1 | 314093 |
StormBrixx® SD access plate
| Overall Length (mm) | Overall Width (mm) | Overall Depth (mm) | Weight (kg) | Part No. | ||
|---|---|---|---|---|---|---|
 |
 |
650 | 650 | 120 | 4.7 | 314075 |
StormBrixx® SD access chamber (2 required per layer)
| Overall Length (mm) | Overall Width (mm) | Overall Depth (mm) | Weight (kg) | Part No. | ||
|---|---|---|---|---|---|---|
 |
 |
594 | 594 | 457 | 18.1 | 138141 |
StormBrixx® accessories
Rhinocast square solid top ductile iron access cover and frame
| Overall Length (mm) | Overall Width (mm) | Overall Depth (mm) | Weight (kg) | Part No. | ||
|---|---|---|---|---|---|---|
 |
Class B | 560 | 600 | 55 | 44 | 85249 |
| Class D | 660 | 660 | 100 | 87 | 89268 |
Rhinocast square recessed ductile iron access cover and frame
| Overall Length (mm) | Overall Width (mm) | Overall Depth (mm) | Weight (kg) | Part No. | ||
|---|---|---|---|---|---|---|
 |
Class B | 560 | 600 | 55 | 47 | 85014 |
| Class D | 665 | 665 | 100 | 85 | 89013 |
EzyBrixx® square rising access shaft
| Overall Length (mm) | Overall Width (mm) | Overall Depth (mm) | Weight (kg) | Part No. | ||
|---|---|---|---|---|---|---|
 |
150mm high shaft | 650 | 650 | 150 | 4.9 | 142832 |
| 300mm high shaft | 650 | 650 | 300 | 9.8 | 142831 | |
 |
Connector clips (set of 4) | 94 | 24 | 26 | 0.05 | 142840 |
Circular solid top ductile iron access cover and frame
| Overall Length (mm) | Overall Width (mm) | Overall Depth (mm) | Weight (kg) | Part No. | ||
|---|---|---|---|---|---|---|
 |
Class D400 | - | ø528 | 110 | 38 | 314043 |
Circular rising access shaft
| Overall Length (mm) | Overall Width (mm) | Overall Depth (mm) | Weight (kg) | Part No. | ||
|---|---|---|---|---|---|---|
 |
300mm high shaft | - | ø437 | 350 | 2.6 | 314038 |
Pipe connectors with flange
| Overall Length (mm) | Overall Width (mm) | Overall Depth (mm) | Weight (kg) | Part No. | ||
|---|---|---|---|---|---|---|
 |
DN100 | 210 | 210 | 200 | 0.6 | 142833 |
| DN150 | 260 | 260 | 200 | 1.2 | 142834 | |
| DN225 | 350 | 350 | 200 | 2.5 | 142835 | |
| DN300 | 415 | 415 | 200 | 4.0 | 142836 | |
| DN375 | 500 | 500 | 200 | 6.0 | 142837 |
Geomembranes & geotextiles
Geomembrane for detention / retention tanks
| Roll Size (m) | Area (m2) | Weight (kg) | Part No. | ||
|---|---|---|---|---|---|
 |
1mm liner - 8m x 50m roll 1, 2 | 8 x 50 | 400 | 400 | 142967 |
| 1 Geomembrane roll can be cut down to size for a nominal cutting fee, contact ACO. 2 Prefabricated geomembrane panels up to approximately 1,000m2 can be supplied, contact ACO. |
|||||
Non woven geotextile for detention / retention tanks
| Roll Size (m) | Area (m2) | Weight (kg) | Part No. | ||
|---|---|---|---|---|---|
 |
2m x 50m roll 3 | 2 x 50 | 100 | 15 | 142971 |
| 2m x 175m roll 3 | 2 x 175 | 350 | 70 | 142973** | |
| 3m x 175m roll 3 | 3 x 175 | 525 | 105 | 142974** | |
| 4m x 175m roll 3 | 4 x 175 | 700 | 140 | 142975** | |
| 6m x 175m roll 3 | 6 x 175 | 1050 | 210 | 142976** | |
| ** If supplied from Perth office, add 'WA' to the end of the Part #, for example '142973WA' 3 Non woven geotextile can also be used for infiltration tanks. |
|||||
Woven geotextile for infiltration tanks
| Roll Size (m) | Area (m2) | Weight (kg) | Part No. | ||
|---|---|---|---|---|---|
| 2m x 50m roll | 2 x 50 | 100 | 13 | 142965 | |
| 4m x 50m roll | 4 x 50 | 200 | 28 | 142966 |
For information on Geomembranes and Geotextiles, click here.
Related products:
ACO also offers a diverse range of urban infrastructure drainage systems for public domains, community areas, streetscapes, schools, business parks, car parks, commercial and industrial developments. For more info, click here.